Tips for Smooth Testing


General (All Tests)


The emissions control equipment for your vehicle must be intact and functioning. Vehicles missing a catalytic converter will be rejected from the emissions test if that model vehicle was originally equipped with a catalytic converter. Removing or tampering with emissions equipment may cause your vehicle to fail the test.


Follow recommended maintenance schedules for your vehicle. Read the owner's manual and follow maintenance guidelines. Your vehicle will perform more efficiently, increasing its chances of passing the emissions test. Regular maintenance includes periodic oil and filter changes, as well as tune-ups.


A gas cap is required equipment. It must be the correct type for your vehicle and be in place.


Do not overfill the gas tank. When you fill your tank, resist the impulse to get just a "little bit more" into the tank after the nozzle clicks off. The excess gasoline has nowhere to expand and may saturate a part of the emissions system.


Safety for E-Check inspectors and customers is of the utmost importance; therefore, all vehicles will be turned away from the testing station if the vehicle demonstrates any of the following:

§  Brake light illumination

§  Driveability problems

§  Drive train noise

§  Fluid leaks

§  Doors or windows inoperable

On-Board Diagnostics (OBD) II Test


If the "check-engine"light is illuminated, your vehicle will fail the test. Check our list of Licensed E-Check Repair Facilities and have your vehicle repaired before having it tested.


BMW Series 7 owners must provide accessibility to the On-Board Diagnostics (OBD II) computer by removing the cover plate prior to inspection.  BMW dealers can provide this service. Ohio EPA regrets any inconvenience this may cause.